This afternoon I fitted two tank gauges purchased from YPAg and manufactured by Rainharvesting Pty Ltd. One to the 27kl tank and the other to the 22.5kl tank near the growers pens. Installation was quite a simple procedure. A 32mm hole was cut in the lid with a hole saw, then the gauge was calibrated outside the tanks to get empty and full positions, then screw down the gauge with the phillips head stainless steel screws and job completed!
RAH1680_Tank_Gauge_Spec_Sheet_FinArt_LR
Tank Gauge Installed on 27kl Tank
Tank Gauge Installed No.2 12-5-12
Related articles
- Tips for Selecting an Ideal Rainwater Tank (groundtoground.org)
Tags: hole saw, Rainwater harvesting, Rainwater tank, tank, tank gauge, Water, Water tank
